Added piece of mind knowing your worksite is ‘fever free’
If your site access protocol requires a temperature screening module, the following solutions will support the screening of all entrants.
Fever Screening Hand Held Camera
The handheld thermal camera is specifically designed for mass scanning of crowded area body temperature measurements. It is equipped with a 160 x 120 resolution thermal detector and quickly detects fevers. Image Sensor uses uncooled focal plane arrays.
- Thermographic accuracy + 0.5 degree C
- Supports live view on PC, mobile device or external monitor
- Wifi & Bluetooth
- Image and video recorder
- Onscreen display
- Visual and audible alarm
- 16 GB storage for future review
- FOV 250 x 18.70
Single Video Thermal Monitor – 10″ Floor & Turnstile Model
The 10 inch individual temperature and access scanner is a standalone, plug and play, system. The temperature scanner is supported by a voice prompt system that can be connected to an access card reader.
- Supports Vanadium Oxide uncooled sensor to measure target’s temperature
- Temperature measuring range: 30 °C to 45 °C (86 °F to 113 °F), accuracy: ± 0.5 °C without black body calibration
- Recognition distance: 0.3 to 2 m
- Multiple authentication modes
- Face mask wearing alert
- Triggers voice prompt when detecting fever
- Configurable door status (open/close) when detecting fever
Single Video Thermal Monitor – 7″ Wall, Stand or Turnstile Model
The 7 inch wall, stand or turnstile mounted individual thermal scanner provides temperature screening in conjunction with access control.
- Supports Vanadium Oxide uncooled sensor to measure target’s temperature
- Temperature measuring range: 30 °C to 45 °C (86 °F to 113 °F), accuracy: ± 0.5 °C without black body calibration
- Recognition distance: 0.3 to 2 m
- Fast temperature measurement mode: Detects face and takes body temperature without identity
- Multiple authentication modes are available:
- Triggers voice prompt when detecting fever
- Configurable door status (open/close) when detecting fever
- Transmits online/ offline
- Connects to access card reader
Mass Video Thermal Monitor with Black Body
The Mass (non contact) Video Thermal Monitor (MVTM) is designed to allow crowds to filter passed the system unhindered. It accurately tests individuals down to 0.3 degree C using a Black Body calibration unit. The system is primarily an indoor unit but can be used outdoors under a controlled environment. It is also equipped with a facial recognition that will prohibit access if a high temperature is detected. If a high temperature is detected the screened person will be informed by audible and visual alarms.
- 400 x 300 resolution
- Vanadium Oxide Technology
- Can scan 5000 people in 30 minutes
- Will still detect temperature if the person is wearing a hat/vail, maks and glasses. Most accurate when hat is removed
- Scans with best accuracy at 10ft away
- Thermographic accuracy + 0.3 degree C
- Utilizes a Network Video Recorder (NVR) and monitor.
- Onscreen display
- Visual and audible alarm
- 2TB data storage